WhirlyMate - Closable Square Ceiling Register

CLOSABLE CEILING REGISTER GIVES YOU RELIEF WHEN NEEDED.

WhirlyMate is a closable ceiling register which allows you to control the flow of heat from a room. During summer, the vent is easily opened to allow warm room air to be drawn into the attic space for removal by a roof ventilator. Then, in winter, the vent can be closed to prevent loss of home heating.

WhirlyMate is very easy to install and simple to open and close. A feature is the ease of operation using a simple wand when installed in high ceilings. Its grille complements most decors and is made of attractive ABS. A feature is the unique, maintenance -free, shutter mechanism (patent applied for).

THE SOLUTION TO CATHEDRAL CEILING HEAT BUILD-UP.

While modern home design, with large glass areas, low or cathedral ceilings and second storey additions can be architecturally pleasing, they also allow summer heat to enter and collect in the home. Air conditioning is an expensive and energy inefficent solution. The answer is to install a WhirlyMate in hot rooms, such as kitchens, bedrooms and living areas. Hot air is then released from the home and vented through an Edmonds turbine ventilator such as a Supavent, or the powerful, thermostat controlled, Maestro 12V or Maestro Solar. In winter, WhirlyMate is simply closed to prevent heat escape from the home.

WHIRLYMATE IS EASY TO INSTALL AND OPERATE.

Installation is a simple process involving the removal of a small section of plasterboard ceiling and the clip-in insertion of the register. The kit inlcudes an operating tool which can be fitted to 16mm dowel to make a 'wand' for use with high ceilings. For ceilings with limited cavity space (i.e. less than 150mm) a mounting box is available to assist with installation in these difficult areas. The WHIRLYMATE mounting box is a white aluminium frame that enables full operation of the opening and closing shutters.