Ventilator dampers are made in a variety of types from butterfly dampers to louvers. Edmonds® butterfly single-disc and split-disc dampers have been designed to allow flexible and reliable means of air movement control.

Operations of a damper can be manual (by a hand cord) or electric (by a motor).

Edmonds® split-disc is an advantageous solution when height of the ventilator has to be taken into account. Edmonds® butterfly split-disc (or wings) swings downwards so it minimise the obstruction of the ventilator turbine top such as the Hurricane® and EcoPower® and the dampers are spring hold close but can be manually opened by tensioning a cord.

Edmonds® butterfly split-disc dampers can also be electrically operated to open or close:

  • Split-disc manual cord operated damper – Edmonds Type 1 damper
  • Split-disc manual cord and cleat operated damper– Edmonds Type 2 damper
  • Split-disc electric damper – Edmonds Type 5 damper

The single-disc damper have less moving parts to minimise air leakage.

  • Single-disc electric Dampers: Edmonds Type 6 damper

   Single disc 
 Divide disc 
 Manual cord 
 -  Type 1 
 Manual cord and cleat 
 -  Type 2
 Type 6
 Type 5

Damper is a ventilator accessory that can be used in applications such as smoke or fire release, cold climate zones or when control of air supply is required.

Note: The dampers are designed so they are not tightly sealed to which it creates a partial vacuum around the base, as it will increase the risk of water entry due to the vacuum.

Contact our technical team
Specialist team:
(02) 8824 0444

Hurricane is designed and built to endure tough conditions and operating environments.